|
|
Bottled Water Plant
Ⅰ.To meet International Standard 1. The bottled water plant can meetthe standards of EPA816-F-03-16 (EPA National Drinking water Standards) from the United States Environmental Department and can meet the standard of drinking water from World Health Organization (WHO Guidelines for Drinking-water Quality) 2. To equip the appropriate pretreatment equipment or the mainframe equipment for reverse osmosis of second grade for the plant is needed in some cases having contamination. Ⅱ.Assembly Conditions The plant takes smaller volume. There is the running water or groundwater sources, and the 380 V power supply. Ⅲ. The plant for Bottled Mineral Water and Bottled Pure Water The plant for mineral water
Process: raw water - multi media filters - activated carbon filters –précised filters- booster pumps – ultra-filtration system - ozone disinfection system - pure water tanks - filling system. Process of the production equipment for pure water The plant for pure water
Process: raw water - multi media filters - activated carbon filters –cationic resin softener -précised filters- high pressure pump - reverse osmosis system - ozone disinfection system-pure water tanks-filling system. Process of the plant for Pure Water: First level of the pretreatment system Use quartz multi-media filter. The main purpose is to remove the traces of sand, manganese, rust, colloidal substances, machinery impurities, and the particles in the suspension with more than 20 UM which are harmful to human body. Automatic filtration system uses imported fleck controller which can automatically do a series of operations like the backwashing and normal washing. At the same time, the equipment has the self-maintenance system, with low operating cost. The filter mainly includes: PPF, AC coconut carbon, and so on. Second level of the pretreatment system
Third level of the pretreatment system Use the cationic resin softer to soften the water, mainly to remove the water hardness. The water hardness is mainly formed by the calcium (Ca2 +) and magnesium (Mg2 +) ion. When the water with hardness runs through the resin layer, the Ca2 + and Mg2 + in the water will be attached to the resin, at the same time, the same amount of Na + ions will be released. In this way, the water running from the softer is the softened water without hardness. To effectively prevent fouling at the reverse osmosis membrane, the system can automatically do backwashing, normal washing, and the intelligent regeneration to extend the life. Forth level of the pretreatment system Use a précised equipment of 5-micron aperture to further purify the water, so that the turbidity and color of the water can be optimized. Ensure the requirements of the inlet water in the RO system. The mainframe system of the bottled water plant for pure water Use the reverse osmosis technology for desalination, where the pore size of the membrane is only 0.0001 micron, which can remove the dissolved solids, bacteria, and viruses and so on, with a desalination rate of over 99.6%. It can produce the clean water in accordance with national standards. The mainframe contains the security filters, high pressure pumps, and reverse osmosis membrane, where the security filters are the pretreatment system of fourth grade as above, the high pressure pump is one of the core equipments on the mainframe to provide the pressure for the reverse osmosis membrane elements to overcome resistance to osmotic pressure and pressure in operation, to meet the rated water quantity. The ozone sterilization system The bottled water plant can meet the standards of EPA816-F-03-16 (EPA National Drinking water Standards) from the United States Environmental Department and can meet the standard of drinking water from World Health Organization (WHO Guidelines for Drinking-water Quality) Ⅳ.The Plant Characteristics ◆ After booting, the equipment automatically starts washing for the membrane, and the rinse time is adjustable.
◆Low-voltage protection system will stop automatically when the water pressure is inadequate or there is no water to protect the safety of the high-pressure pumps and the equipment. ◆ There is the cleaning equipment and maintenance systems, which can regularly clean and do the maintenance of equipment. In this way, it can extend the service life of the reverse osmosis membrane for 3-5 years. ◆ The plant uses the stainless steel truss structure, to realize a health dead ends. There is no corrosion on the equipment, so even if it has been used for 10-20 years, it is still as good as new.
◆ The reverse osmosis equipment can use together with the mineral water plant (mountain spring water equipment) to reduce investment cost and improve the utilization rate of the water resources. ◆ Automatic devices can achieve an operation unattended for 24-hour. ◆ There is the water-detection device on the plant. Observe the water quality at any time.
We offer you ★ The automatic and semi-automatic production line unit and accessories filling supply of the complete sets of equipment for pure water, mineral water (mountain spring water) equipment, ozone sterilization, ultra-violet disinfection, big barrel and small bottle. Note: single-stage reverse osmosis devices are suitable for the areas where the raw water conductivity is less than 600 µ s /cm, as for areas with that of more than 600 µ s /cm, they need the two-stage reverse osmosis equipment so that they can produce the pure water and reach the national standard: conductivity ≤ 10 µ s / cm.
v. The bottled water plant Types 1. Economic type pure water equipment configuration: daily water (per barrel): 240 barrels (0.25 T / H) 2. Standard type pure water equipment configuration: Daily water barrels: 500 barrels (0.5 T / H) 3. Scale type pure water equipment configuration: daily water barrels: 1000 barrels (1 T/H) 4. A large-scale type clean-water equipment configuration: daily water barrels: 2000 barrels (2 T/H)
|
 |
 |
Add.: 20 West Chegongzhuang Road Beijing 100044 China.  010-68455929  010-68411453 |
 |
